For anyone who wishes to seem naturally stunning without spending a fortune, lace front wigs are the preferred wig style. You’ll always look perfect whether you’re attending formal events, going on a date, or simply lounging on the couch with a good lace front wig installation. Sadly, folks frequently don’t know how to use their new lace front home when they first obtain it. A lace front wig can be worn both with and without glue. In this article, we’ll explain how to apply a lace front wig using each of these techniques. Let’s start straight away!
Flatten your hair before installing a lace front wig.
No one should omit this procedure to ensure a perfect lace front wig installation of their natural hair. Because the lace wig may sit excessively high on your head if you attach it to unprepared hair. This won’t just damage your look; it will also make it obvious that you’re wearing a wig. For the installation of a lace front wig, there are three common approaches to get your hair ready.
a. Cornrow your hair
Putting your natural hair in cornrows is one of the most popular techniques to prepare it. Although there are several splitting options, “straight backs” are the most popular for both short and long hair. Simply divide your hair into seven or more straight back pieces, cornrow each portion, and secure it in the back with pins. Utilizing bobby pins, fasten the braids to the back of your head after bundling up their ends. Because of this, they won’t fall apart. If you braid your hair down, it will be shielded from knots and your lace front wig will lay smooth and sleek.
b. Backcomb your hair
Don’t worry if you can’t braid well. Just smooth it back with some gel or holding spray if your hair isn’t too long or thick. Simply gel the hair around your edges, then brush your hair in the opposite direction using a boar bristle brush. The ends of your low ponytail with your hair pulled back in a bun should be fastened with bobby pins. Once you’ve done that, cover your natural hair with a nylon wig cap so that it stays in place while you wear your lace front wig.
You can braid or plait a few three-strand plaits (braids) with fine hair and pin them to your head. To keep your hair in place after, put on a wig cap.
Be sure your hair is shampooed, condition-treated, moisturized, and completely dried before using any of the hair-flattening techniques listed above.
You are all set to learn how to wear a lace front wig once your natural hair has been prepared.
Wearing a Lace Front Wig With Glue
Wig glue is the ideal tool for attaching a lace front wig. Your lace wig will remain firmly in place regardless matter how vigorous your physical activity is, how powerful the wind is, or if you unintentionally tear the lace out of the glue holding it on. You can wear your wig for up to 6 weeks, depending on the wig glue you use. Your wig will be secured for up to a week if you apply got2b glued spray.
You will want the following tools and supplies to glue your wig in place:
- Wig stocking cap
- Wig glue or got 2b Glued Spray (Shop Here: Got 2b Glued Spiking Glue or Got 2b Glued Blasting Freeze Spray)
- Bobby pins or hair clips
- Rat-tail comb
- Alcohol prep pads or rubbing alcohol and cotton balls
- Nail cutting
- Eyeliner in white
- Blow dryer with a “cool” setting
- Silk or satin scarf
Step 1. Make Your Natural Hair Flat
According to the previous section, make sure your natural hair is flat and securely fastened. Utilize gel or a holding spray to lay down your edges. The friction between the wig cap and your natural hair will be lessened if you do this.
Step 2: Keep your hairline clean
To remove any makeup residue or debris from your hairline, use an alcohol prep pad or a cotton pad soaked in alcohol. Alcohol will dry out your hair, so take care not to get any on it.
Step 3: Wear a wig cap
To keep your natural hair in place and create a smooth, flat surface for the wig to sit upon, put on a wig cap. You may also choose to wear a wig grip. Another method to secure your device is to use a wig grip. For this installation type, it is optional yet useful for those who desire an additional layer of security.
Step 4: Wear your Lace Front Wig.
Put your wig on your head after removing it from the packaging. Set it up so that your natural hairline is in line with it. Use the adjustable strap on your wig if it has one to prevent the wig from slipping off. To help you know where to apply the adhesive in the next step, lightly trace the area where you want the lace to be placed with a white eyeliner pencil.
Step 5: Trim the Extra Lace
Remove any extra lace from your ears and hairline by trimming it with a pair of sharp scissors. Be careful not to cut too much lace.
Step 6: Apply Wig Glue
Along your hairline, where you made those eyeliner marks, use wig glue or got2b glued spray.
Step 7: Blow Dry Wig Glue
To slightly dry the glue and make it tacky, use your blow dryer.
Step 8: Glue Your Lace Front Wig Down
Then, push it into the Glue by pulling your lace forward.
Step 9: Get Rid of Extra Glue
Any remaining adhesive on your skin can be removed using alcohol. Avoid getting any alcohol on the lace at all costs as it could damage the bond formed by the adhesive.
Step 10: Secure Your Lace Front Wig
For at least 30 minutes, secure the front of your wig with a silk or satin scarf. This will make the glue’s binding stronger.
Step 11: Style Your Lace Front Wig
Take off the scarf, then style your wig anyway you like.
Apply Lace Front Wigs without Glue
Even while most people like to wear their lace front wigs with adhesive, there are situations when going glueless is advantageous. For those who want to switch up their wigs frequently or have wig adhesive allergies, glueless lace front wig installation is perfect. When you need to leave the house quickly, it is also useful.
Without glue, you can quickly put on and remove your wig. Furthermore, if you correctly apply the wig, you won’t have to worry about it falling off until you’re ready to take it off. Additionally, you won’t need to bother with messy glue or challenging application methods.
If they are made properly, lace front wigs can be worn without glue. Most of the following elements are required for a glueless lace front wig:
Combs in the back: Combs are quite helpful in keeping any wig in place, but they take on a greater significance when you intend to wear it without glue. You simply insert wig combs at a diagonal angle into your hair to use them.
Elastic straps: The lace wig’s front is fastened with elastic straps that are wrapped around the head’s rear. They aid in keeping the wig on your head firmly. Simply wrap the elastic strap over your head’s back to put your lace front wig on. For a snug fit on your head, adjust the strap as needed.
Wig clips: Combs are less secure than clips. This is due to the fact that they include a clamping mechanism in addition to a comb to hold the lace wig in place. When using wig clips, insert the comb into your hair and press firmly on the clip’s opposite sides to attach it.
Flexible ear tabs: Flexible wires called ear tabs are sewed into the lace just above your ears. Ear tabs are designed to prevent your lace from lifting up on the sides. Fold them into the shape of your head to use them.
Note: If your lace front wig does not already have these reinforcements, you can install them if you are skilled enough with a needle and thread.
Products and Tools for Lace Front Wig Installation Without Glue – Before putting your wig in place without glue, make sure you have the necessary supplies and equipment:
- Rattail comb
- Nylon wig cap
- Wig grip
- Styling Mousse
- Silk or satin scarf
The 9 steps listed below must be followed in order to put on a lace front without glue:
Step 1: Secure Your Own Hair
Spend a few minutes securing your hair with one of the techniques mentioned before. The best way to get your hair flat is to cornrow it if it’s extremely thick or long.
Step 2: Put on the wig cap and grip.
Put on a nylon wig cap, and then on top of that, wig grip. For glueless wig installation, the wig grip is crucial since it prevents your wig from shifting during the day. You should take as many measures as you can to secure your wig because you won’t be utilizing adhesive. By utilizing the velcro to secure it, you’ll use your wig grip exactly like a headband.
Step 3: Place the Wig on Your Head
Make sure your lace front wig is comfortable on your head before putting it on.
Step 4: Adjust Wig Size
Look inside the wig for the adjustable strap, then pull it over your head. Spend a few seconds making the necessary adjustments if you need to.
Step 5: Secure Your Lace Front Wig
Make sure to secure any clips or combs that the wig may have in your hair (at the nape of your neck) by inserting them there.
Step 6: Cut the Lace Off
Cut the excess lace off gradually to make it match your hairline.
Step 7: Lay Your Front Lace Flat
Fold the bendable ear tabs on your wig so that they resemble the sides of your head if it has them.
Step 8: Apply Mousse
Smooth the hair down and apply a little mousse around your hairline. Place a scarf at the base of your hair. By doing this, you’ll give the lace some weight and make the hairline lay flat.
Step 9: Style Your Glueless Lace Front Wig
After a few minutes, take off the scarf and style your wig how you like.
The Perfect Lace Front Wig Installation: 5 Pro Tips
You want your wig to seem flawless, and we bet you can achieve that, we assure you. The following 5 useful suggestions will help you install a lace front wig perfectly.
a. Pick lace that melts into your skin or a color that complements your skin tone.
It won’t look real if the lace on your wig doesn’t match your skin color perfectly. Fortunately, lace comes in a variety of colors, so you can look around for a lace front with lace that precisely complements your skin tone. But if you want to take it easy, choose skin-melt lace, which blends in with any skin tone, regardless of how light or dark it is.
Skin-melting lace that is completely unnoticeable against the skin is used in the new Clear Lace & Clean Hairline Wigs.
b. Pick the appropriate wig size.
It’s crucial to pick the proper wig size so that it fits your head comfortably and can be easily put on. It might rapidly grow painful to wear a wig if you pick one that is too small. Your wig can slide if it is too big for your head. Measure the size of your head before purchasing a lace front wig as a favor to yourself. After that, utilize our sizing charts to ensure that you order the right size.
c. Correctly cut the lace off.
Cutting the extra lace at the hairline (in front of the hairs) and around the ear tabs is crucial. If the lace is not properly cut, it will not lie flat along your hairline. To cut lace like a pro, adhere to these steps:
If you’re just starting off, put your wig on a mannequin head and start cutting the lace using small scissors like nail-cutting ones.
Start at the center of the lace, then work your way out. Be careful not to cut the baby hairs on your wig if it has any.
To avoid unintentionally cutting off too much, cut a small amount of lace at a time. Avoid making a straight cut because the lace won’t be as easy to meld with your skin and hairline. As an alternative, make rounded, wavy motions that match your natural hairline.
d. Make some baby hairs
In order to conceal the lace’s edges, baby hairs are useful. Part out a small bit of hair over the wig’s hairline using a rat tail comb to start. Once the hair is about an inch long, cut it using a gentle, steady motion with an eyebrow razor.
Make sure you’re holding the part taut as you cut and sliding the eyebrow razor up and down. You’ve completed the baby hairs!
e. The wig’s hairline and parting should be covered in foundation.
To make your lace front wig look even more real, you might choose to take this optional step. Make sure the foundation matches the tone of your skin. Till the lace resembles your skin, freely apply it. The best makeup to use is powder.